# What is a GVCF and how is it different from a 'regular' VCF?Frequently Asked Questions | Created 2014-04-03 | Last updated 2014-10-22

### Overview

GVCF stands for Genomic VCF. A GVCF is a kind of VCF, so the basic format specification is the same as for a regular VCF (see the spec documentation here), but a Genomic VCF contains extra information.

This document explains what that extra information is and how you can use it to empower your variants analyses.

### Important caveat

What we're covering here is strictly limited to GVCFs produced by HaplotypeCaller in GATK versions 3.0 and above. The term GVCF is sometimes used simply to describe VCFs that contain a record for every position in the genome (or interval of interest) regardless of whether a variant was detected at that site or not (such as VCFs produced by UnifiedGenotyper with --output_mode EMIT_ALL_SITES). GVCFs produced by HaplotypeCaller 3.x contain additional information that is formatted in a very specific way. Read on to find out more.

### General comparison of VCF vs. gVCF

The key difference between a regular VCF and a gVCF is that the gVCF has records for all sites, whether there is a variant call there or not. The goal is to have every site represented in the file in order to do joint analysis of a cohort in subsequent steps. The records in a gVCF include an accurate estimation of how confident we are in the determination that the sites are homozygous-reference or not. This estimation is generated by the HaplotypeCaller's built-in reference model.

Note that some other tools (including the GATK's own UnifiedGenotyper) may output an all-sites VCF that looks superficially like the BP_RESOLUTION gVCFs produced by HaplotypeCaller, but they do not provide an accurate estimate of reference confidence, and therefore cannot be used in joint genotyping analyses.

### The two types of gVCFs

As you can see in the figure above, there are two options you can use with -ERC: GVCF and BP_RESOLUTION. With BP_RESOLUTION, you get a gVCF with an individual record at every site: either a variant record, or a non-variant record. With GVCF, you get a gVCF with individual variant records for variant sites, but the non-variant sites are grouped together into non-variant block records that represent intervals of sites for which the genotype quality (GQ) is within a certain range or band. The GQ ranges are defined in the ##GVCFBlock line of the gVCF header. The purpose of the blocks (also called banding) is to keep file size down, and there is no downside for the downstream analysis, so we do recommend using the -GVCF option.

### Example gVCF file

This is a banded gVCF produced by HaplotypeCaller with the -GVCF option.

As you can see in the first line, the basic file format is a valid version 4.1 VCF:

##fileformat=VCFv4.1
##ALT=<ID=NON_REF,Description="Represents any possible alternative allele at this location">
##FILTER=<ID=LowQual,Description="Low quality">
##FORMAT=<ID=AD,Number=.,Type=Integer,Description="Allelic depths for the ref and alt alleles in the order listed">
##FORMAT=<ID=GQ,Number=1,Type=Integer,Description="Genotype Quality">
##FORMAT=<ID=GT,Number=1,Type=String,Description="Genotype">
##FORMAT=<ID=MIN_DP,Number=1,Type=Integer,Description="Minimum DP observed within the GVCF block">
##FORMAT=<ID=PL,Number=G,Type=Integer,Description="Normalized, Phred-scaled likelihoods for genotypes as defined in the VCF specification">
##FORMAT=<ID=SB,Number=4,Type=Integer,Description="Per-sample component statistics which comprise the Fisher's Exact Test to detect strand bias.">
##GVCFBlock=minGQ=0(inclusive),maxGQ=5(exclusive)
##GVCFBlock=minGQ=20(inclusive),maxGQ=60(exclusive)
##GVCFBlock=minGQ=5(inclusive),maxGQ=20(exclusive)
##GVCFBlock=minGQ=60(inclusive),maxGQ=2147483647(exclusive)
##INFO=<ID=BaseQRankSum,Number=1,Type=Float,Description="Z-score from Wilcoxon rank sum test of Alt Vs. Ref base qualities">
##INFO=<ID=ClippingRankSum,Number=1,Type=Float,Description="Z-score From Wilcoxon rank sum test of Alt vs. Ref number of hard clipped bases">
##INFO=<ID=DS,Number=0,Type=Flag,Description="Were any of the samples downsampled?">
##INFO=<ID=END,Number=1,Type=Integer,Description="Stop position of the interval">
##INFO=<ID=HaplotypeScore,Number=1,Type=Float,Description="Consistency of the site with at most two segregating haplotypes">
##INFO=<ID=InbreedingCoeff,Number=1,Type=Float,Description="Inbreeding coefficient as estimated from the genotype likelihoods per-sample when compared against the Hardy-Weinberg expectation">
##INFO=<ID=MLEAC,Number=A,Type=Integer,Description="Maximum likelihood expectation (MLE) for the allele counts (not necessarily the same as the AC), for each ALT allele, in the same order as listed">
##INFO=<ID=MLEAF,Number=A,Type=Float,Description="Maximum likelihood expectation (MLE) for the allele frequency (not necessarily the same as the AF), for each ALT allele, in the same order as listed">
##INFO=<ID=MQ,Number=1,Type=Float,Description="RMS Mapping Quality">
##INFO=<ID=MQRankSum,Number=1,Type=Float,Description="Z-score From Wilcoxon rank sum test of Alt vs. Ref read mapping qualities">
##INFO=<ID=ReadPosRankSum,Number=1,Type=Float,Description="Z-score from Wilcoxon rank sum test of Alt vs. Ref read position bias">
##contig=<ID=20,length=63025520,assembly=b37>
##reference=file:///humgen/1kg/reference/human_g1k_v37.fasta

Toward the middle you see the ##GVCFBlock lines (after the ##FORMAT lines) (repeated here for clarity):

##GVCFBlock=minGQ=0(inclusive),maxGQ=5(exclusive)
##GVCFBlock=minGQ=20(inclusive),maxGQ=60(exclusive)
##GVCFBlock=minGQ=5(inclusive),maxGQ=20(exclusive)

which indicate the GQ ranges used for banding (corresponding to the boundaries [5, 20, 60]).

You can also see the definition of the MIN_DP annotation in the ##FORMAT lines.

#### Records

The first thing you'll notice, hopefully, is the <NON_REF> symbolic allele listed in every record's ALT field. This provides us with a way to represent the possibility of having a non-reference allele at this site, and to indicate our confidence either way.

The second thing to look for is the END tag in the INFO field of non-variant block records. This tells you at what position the block ends. For example, the first line is a non-variant block that starts at position 20:10000000 and ends at 20:10000116.

#CHROM  POS ID  REF ALT QUAL    FILTER  INFO    FORMAT  NA12878
20  10000000    .   T   <NON_REF>   .   .   END=10000116    GT:DP:GQ:MIN_DP:PL  0/0:44:99:38:0,89,1385
20  10000118    .   T   <NON_REF>   .   .   END=10000210    GT:DP:GQ:MIN_DP:PL  0/0:42:99:38:0,80,1314
20  10000212    .   A   <NON_REF>   .   .   END=10000438    GT:DP:GQ:MIN_DP:PL  0/0:52:99:42:0,99,1403
20  10000439    .   T   G,<NON_REF> 1737.77 .   DP=57;MLEAC=2,0;MLEAF=1.00,0.00;MQ=221.41;MQ0=0 GT:AD:DP:GQ:PL:SB   1/1:0,56,0:56:99:1771,168,0,1771,168,1771:0,0,0,0
20  10000440    .   T   <NON_REF>   .   .   END=10000597    GT:DP:GQ:MIN_DP:PL  0/0:56:99:49:0,120,1800
20  10000598    .   T   A,<NON_REF> 1754.77 .   DP=54;MLEAC=2,0;MLEAF=1.00,0.00;MQ=185.55;MQ0=0 GT:AD:DP:GQ:PL:SB   1/1:0,53,0:53:99:1788,158,0,1788,158,1788:0,0,0,0
20  10000599    .   T   <NON_REF>   .   .   END=10000693    GT:DP:GQ:MIN_DP:PL  0/0:51:99:47:0,120,1800
20  10000695    .   G   <NON_REF>   .   .   END=10000757    GT:DP:GQ:MIN_DP:PL  0/0:48:99:45:0,120,1800
20  10000758    .   T   A,<NON_REF> 1663.77 .   DP=51;MLEAC=2,0;MLEAF=1.00,0.00;MQ=59.32;MQ0=0  GT:AD:DP:GQ:PL:SB   1/1:0,50,0:50:99:1697,149,0,1697,149,1697:0,0,0,0
20  10000759    .   A   <NON_REF>   .   .   END=10001018    GT:DP:GQ:MIN_DP:PL  0/0:40:99:28:0,65,1080
20  10001020    .   C   <NON_REF>   .   .   END=10001020    GT:DP:GQ:MIN_DP:PL  0/0:26:72:26:0,72,1080
20  10001021    .   T   <NON_REF>   .   .   END=10001021    GT:DP:GQ:MIN_DP:PL  0/0:25:37:25:0,37,909
20  10001022    .   C   <NON_REF>   .   .   END=10001297    GT:DP:GQ:MIN_DP:PL  0/0:30:87:25:0,72,831
20  10001298    .   T   A,<NON_REF> 1404.77 .   DP=41;MLEAC=2,0;MLEAF=1.00,0.00;MQ=171.56;MQ0=0 GT:AD:DP:GQ:PL:SB   1/1:0,41,0:41:99:1438,123,0,1438,123,1438:0,0,0,0
20  10001299    .   C   <NON_REF>   .   .   END=10001386    GT:DP:GQ:MIN_DP:PL  0/0:43:99:39:0,95,1226
20  10001387    .   C   <NON_REF>   .   .   END=10001418    GT:DP:GQ:MIN_DP:PL  0/0:41:42:39:0,21,315
20  10001419    .   T   <NON_REF>   .   .   END=10001425    GT:DP:GQ:MIN_DP:PL  0/0:45:12:42:0,9,135
20  10001426    .   A   <NON_REF>   .   .   END=10001427    GT:DP:GQ:MIN_DP:PL  0/0:49:0:48:0,0,1282
20  10001428    .   T   <NON_REF>   .   .   END=10001428    GT:DP:GQ:MIN_DP:PL  0/0:49:21:49:0,21,315
20  10001429    .   G   <NON_REF>   .   .   END=10001429    GT:DP:GQ:MIN_DP:PL  0/0:47:18:47:0,18,270
20  10001430    .   G   <NON_REF>   .   .   END=10001431    GT:DP:GQ:MIN_DP:PL  0/0:45:0:44:0,0,1121
20  10001432    .   A   <NON_REF>   .   .   END=10001432    GT:DP:GQ:MIN_DP:PL  0/0:43:18:43:0,18,270
20  10001433    .   T   <NON_REF>   .   .   END=10001433    GT:DP:GQ:MIN_DP:PL  0/0:44:0:44:0,0,1201
20  10001434    .   G   <NON_REF>   .   .   END=10001434    GT:DP:GQ:MIN_DP:PL  0/0:44:18:44:0,18,270
20  10001435    .   A   <NON_REF>   .   .   END=10001435    GT:DP:GQ:MIN_DP:PL  0/0:44:0:44:0,0,1130
20  10001436    .   A   AAGGCT,<NON_REF>    1845.73 .   DP=43;MLEAC=2,0;MLEAF=1.00,0.00;MQ=220.07;MQ0=0 GT:AD:DP:GQ:PL:SB   1/1:0,42,0:42:99:1886,125,0,1888,126,1890:0,0,0,0
20  10001437    .   A   <NON_REF>   .   .   END=10001437    GT:DP:GQ:MIN_DP:PL  0/0:44:0:44:0,0,0

Note that toward the end of this snippet, you see multiple consecutive non-variant block records. These were not merged into a single record because the sites they contain belong to different ranges of GQ (which are defined in the header).