Showing tool doc from version 4.1.2.0 | The latest version is 4.1.2.0

PreprocessIntervals

Prepares bins for coverage collection

Category Intervals Manipulation


Overview

Prepares bins for coverage collection.

The input intervals are first checked for overlapping intervals, which are merged. The resulting intervals are then padded. The padded intervals are then split into bins. Finally, bins that contain only Ns are filtered out.

Inputs

  • Reference FASTA file
  • Intervals to be preprocessed. The argument interval-merging-rule must be set to IntervalMergingRule#OVERLAPPING_ONLY and all other common arguments for interval padding or merging must be set to their defaults. If no intervals are specified, then each contig will be assumed to be a single interval and binned accordingly; this produces bins appropriate for whole genome sequencing analyses.
  • Padding length (in bp). Use padding to specify the size of each of the regions added to both ends of the intervals that result after overlapping intervals have been merged. Do not use the common interval-padding argument. Intervals that would overlap after padding by the specified amount are instead only padded until they are adjacent.
  • Bin length (in bp). If this length is not commensurate with the length of a padded interval, then the last bin will be of different length than the others in that interval. If zero is specified, then no binning will be performed; this is generally appropriate for targeted analyses.

Output

  • Preprocessed Picard interval-list file.

Usage examples

To pad intervals by 250 bases and disable binning (e.g., for targeted analyses):
     gatk PreprocessIntervals \
          -R reference.fa \
          -L intervals.interval_list \
          --bin-length 0 \
          --padding 250 \
          -O preprocessed_intervals.interval_list
 
To generate consecutive bins of 1000 bases from the reference (e.g., for whole genome sequencing analyses):
     gatk PreprocessIntervals \
          -R reference.fa \
          --bin-length 1000 \
          --padding 0 \
          -O preprocessed_intervals.interval_list
 

Additional Information

Read filters

This Read Filter is automatically applied to the data by the Engine before processing by PreprocessIntervals.

PreprocessIntervals specific arguments

This table summarizes the command-line arguments that are specific to this tool. For more details on each argument, see the list further down below the table or click on an argument name to jump directly to that entry in the list.

Argument name(s) Default value Summary
Required Arguments
--output
 -O
null Output Picard interval-list file containing the preprocessed intervals.
--reference
 -R
null Reference sequence file
Optional Tool Arguments
--arguments_file
[] read one or more arguments files and add them to the command line
--bin-length
1000 Length (in bp) of the bins. If zero, no binning will be performed.
--cloud-index-prefetch-buffer
 -CIPB
-1 Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.
--cloud-prefetch-buffer
 -CPB
40 Size of the cloud-only prefetch buffer (in MB; 0 to disable).
--disable-bam-index-caching
 -DBIC
false If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.
--disable-sequence-dictionary-validation
false If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!
--gcs-max-retries
 -gcs-retries
20 If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection
--gcs-project-for-requester-pays
"" Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed.
--help
 -h
false display the help message
--interval-merging-rule
 -imr
ALL Interval merging rule for abutting intervals
--intervals
 -L
[] One or more genomic intervals over which to operate
--padding
250 Length (in bp) of the padding regions on each side of the intervals.
--sites-only-vcf-output
false If true, don't emit genotype fields when writing vcf file output.
--version
false display the version number for this tool
Optional Common Arguments
--add-output-sam-program-record
true If true, adds a PG tag to created SAM/BAM/CRAM files.
--add-output-vcf-command-line
true If true, adds a command line header line to created VCF files.
--create-output-bam-index
 -OBI
true If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.
--create-output-bam-md5
 -OBM
false If true, create a MD5 digest for any BAM/SAM/CRAM file created
--create-output-variant-index
 -OVI
true If true, create a VCF index when writing a coordinate-sorted VCF file.
--create-output-variant-md5
 -OVM
false If true, create a a MD5 digest any VCF file created.
--disable-read-filter
 -DF
[] Read filters to be disabled before analysis
--disable-tool-default-read-filters
false Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)
--exclude-intervals
 -XL
[] One or more genomic intervals to exclude from processing
--gatk-config-file
null A configuration file to use with the GATK.
--input
 -I
[] BAM/SAM/CRAM file containing reads
--interval-exclusion-padding
 -ixp
0 Amount of padding (in bp) to add to each interval you are excluding.
--interval-padding
 -ip
0 Amount of padding (in bp) to add to each interval you are including.
--interval-set-rule
 -isr
UNION Set merging approach to use for combining interval inputs
--lenient
 -LE
false Lenient processing of VCF files
--QUIET
false Whether to suppress job-summary info on System.err.
--read-filter
 -RF
[] Read filters to be applied before analysis
--read-index
[] Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.
--read-validation-stringency
 -VS
SILENT Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.
--seconds-between-progress-updates
10.0 Output traversal statistics every time this many seconds elapse
--sequence-dictionary
null Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.
--tmp-dir
null Temp directory to use.
--use-jdk-deflater
 -jdk-deflater
false Whether to use the JdkDeflater (as opposed to IntelDeflater)
--use-jdk-inflater
 -jdk-inflater
false Whether to use the JdkInflater (as opposed to IntelInflater)
--verbosity
INFO Control verbosity of logging.
Advanced Arguments
--showHidden
false display hidden arguments

Argument details

Arguments in this list are specific to this tool. Keep in mind that other arguments are available that are shared with other tools (e.g. command-line GATK arguments); see Inherited arguments above.


--add-output-sam-program-record / -add-output-sam-program-record

If true, adds a PG tag to created SAM/BAM/CRAM files.

boolean  true


--add-output-vcf-command-line / -add-output-vcf-command-line

If true, adds a command line header line to created VCF files.

boolean  true


--arguments_file / NA

read one or more arguments files and add them to the command line

List[File]  []


--bin-length / NA

Length (in bp) of the bins. If zero, no binning will be performed.

int  1000  [ [ 0  ∞ ] ]


--cloud-index-prefetch-buffer / -CIPB

Size of the cloud-only prefetch buffer (in MB; 0 to disable). Defaults to cloudPrefetchBuffer if unset.

int  -1  [ [ -∞  ∞ ] ]


--cloud-prefetch-buffer / -CPB

Size of the cloud-only prefetch buffer (in MB; 0 to disable).

int  40  [ [ -∞  ∞ ] ]


--create-output-bam-index / -OBI

If true, create a BAM/CRAM index when writing a coordinate-sorted BAM/CRAM file.

boolean  true


--create-output-bam-md5 / -OBM

If true, create a MD5 digest for any BAM/SAM/CRAM file created

boolean  false


--create-output-variant-index / -OVI

If true, create a VCF index when writing a coordinate-sorted VCF file.

boolean  true


--create-output-variant-md5 / -OVM

If true, create a a MD5 digest any VCF file created.

boolean  false


--disable-bam-index-caching / -DBIC

If true, don't cache bam indexes, this will reduce memory requirements but may harm performance if many intervals are specified. Caching is automatically disabled if there are no intervals specified.

boolean  false


--disable-read-filter / -DF

Read filters to be disabled before analysis

List[String]  []


--disable-sequence-dictionary-validation / -disable-sequence-dictionary-validation

If specified, do not check the sequence dictionaries from our inputs for compatibility. Use at your own risk!

boolean  false


--disable-tool-default-read-filters / -disable-tool-default-read-filters

Disable all tool default read filters (WARNING: many tools will not function correctly without their default read filters on)

boolean  false


--exclude-intervals / -XL

One or more genomic intervals to exclude from processing
Use this argument to exclude certain parts of the genome from the analysis (like -L, but the opposite). This argument can be specified multiple times. You can use samtools-style intervals either explicitly on the command line (e.g. -XL 1 or -XL 1:100-200) or by loading in a file containing a list of intervals (e.g. -XL myFile.intervals).

List[String]  []


--gatk-config-file / NA

A configuration file to use with the GATK.

String  null


--gcs-max-retries / -gcs-retries

If the GCS bucket channel errors out, how many times it will attempt to re-initiate the connection

int  20  [ [ -∞  ∞ ] ]


--gcs-project-for-requester-pays / NA

Project to bill when accessing "requester pays" buckets. If unset, these buckets cannot be accessed.

String  ""


--help / -h

display the help message

boolean  false


--input / -I

BAM/SAM/CRAM file containing reads

List[String]  []


--interval-exclusion-padding / -ixp

Amount of padding (in bp) to add to each interval you are excluding.
Use this to add padding to the intervals specified using -XL. For example, '-XL 1:100' with a padding value of 20 would turn into '-XL 1:80-120'. This is typically used to add padding around targets when analyzing exomes.

int  0  [ [ -∞  ∞ ] ]


--interval-merging-rule / -imr

Interval merging rule for abutting intervals
By default, the program merges abutting intervals (i.e. intervals that are directly side-by-side but do not actually overlap) into a single continuous interval. However you can change this behavior if you want them to be treated as separate intervals instead.

The --interval-merging-rule argument is an enumerated type (IntervalMergingRule), which can have one of the following values:

ALL
OVERLAPPING_ONLY

IntervalMergingRule  ALL


--interval-padding / -ip

Amount of padding (in bp) to add to each interval you are including.
Use this to add padding to the intervals specified using -L. For example, '-L 1:100' with a padding value of 20 would turn into '-L 1:80-120'. This is typically used to add padding around targets when analyzing exomes.

int  0  [ [ -∞  ∞ ] ]


--interval-set-rule / -isr

Set merging approach to use for combining interval inputs
By default, the program will take the UNION of all intervals specified using -L and/or -XL. However, you can change this setting for -L, for example if you want to take the INTERSECTION of the sets instead. E.g. to perform the analysis only on chromosome 1 exomes, you could specify -L exomes.intervals -L 1 --interval-set-rule INTERSECTION. However, it is not possible to modify the merging approach for intervals passed using -XL (they will always be merged using UNION). Note that if you specify both -L and -XL, the -XL interval set will be subtracted from the -L interval set.

The --interval-set-rule argument is an enumerated type (IntervalSetRule), which can have one of the following values:

UNION
Take the union of all intervals
INTERSECTION
Take the intersection of intervals (the subset that overlaps all intervals specified)

IntervalSetRule  UNION


--intervals / -L

One or more genomic intervals over which to operate

List[String]  []


--lenient / -LE

Lenient processing of VCF files

boolean  false


--output / -O

Output Picard interval-list file containing the preprocessed intervals.

R File  null


--padding / NA

Length (in bp) of the padding regions on each side of the intervals.

int  250  [ [ 0  ∞ ] ]


--QUIET / NA

Whether to suppress job-summary info on System.err.

Boolean  false


--read-filter / -RF

Read filters to be applied before analysis

List[String]  []


--read-index / -read-index

Indices to use for the read inputs. If specified, an index must be provided for every read input and in the same order as the read inputs. If this argument is not specified, the path to the index for each input will be inferred automatically.

List[String]  []


--read-validation-stringency / -VS

Validation stringency for all SAM/BAM/CRAM/SRA files read by this program. The default stringency value SILENT can improve performance when processing a BAM file in which variable-length data (read, qualities, tags) do not otherwise need to be decoded.

The --read-validation-stringency argument is an enumerated type (ValidationStringency), which can have one of the following values:

STRICT
LENIENT
SILENT

ValidationStringency  SILENT


--reference / -R

Reference sequence file

R String  null


--seconds-between-progress-updates / -seconds-between-progress-updates

Output traversal statistics every time this many seconds elapse

double  10.0  [ [ -∞  ∞ ] ]


--sequence-dictionary / -sequence-dictionary

Use the given sequence dictionary as the master/canonical sequence dictionary. Must be a .dict file.

String  null


--showHidden / -showHidden

display hidden arguments

boolean  false


--sites-only-vcf-output / NA

If true, don't emit genotype fields when writing vcf file output.

boolean  false


--tmp-dir / NA

Temp directory to use.

GATKPathSpecifier  null


--use-jdk-deflater / -jdk-deflater

Whether to use the JdkDeflater (as opposed to IntelDeflater)

boolean  false


--use-jdk-inflater / -jdk-inflater

Whether to use the JdkInflater (as opposed to IntelInflater)

boolean  false


--verbosity / -verbosity

Control verbosity of logging.

The --verbosity argument is an enumerated type (LogLevel), which can have one of the following values:

ERROR
WARNING
INFO
DEBUG

LogLevel  INFO


--version / NA

display the version number for this tool

boolean  false


Return to top


See also General Documentation | Tool Docs Index Tool Documentation Index | Support Forum

GATK version 4.1.2.0 built at Tue, 23 Apr 2019 14:55:55 -0400.