FAQ

GSEA Algorithm

What are the differences between GSEA and an overlap statistic (hypergeometric) analysis tool?

An overlap statistic analysis tool typically uses a threshold to define genes as members at the top or bottom of a ranked list of genes.  In contrast GSEA uses the list rank information without using a threshold. The introduction to the Gene Set Enrichment Analysis PNAS paper discusses the limitations of the former approach and how GSEA addresses them.

Why does GSEA use the Kolmogorov-Smirnov statistic rather than the Mann-Whitney test?

The Kolmogorov-Smirnov statistic is slightly more suitable for less coherent data because it takes relatively fewer significant items to score well. The Gene Set Enrichment Analysis PNAS paper discusses the use of this statistic in detail (see the section titled Adjusting for Variation in Gene Set Size in the supplemental information).

Can I change the statistic GSEA uses to create the ranked list of genes?

Yes. Use the Metric for ranking genes parameter to select the statistic that GSEA will use to create the ranked list of genes. If GSEA does not provide the statistic that you want to use, you can create your own ranked list of genes and have GSEA use that list as the starting point for the analysis. For more information, see the Metric for ranking genes parameter on the Run GSEA Page in the GSEA User Guide.

How does GSEA calculate the false discovery rate (FDR), the nominal p value, and the family-wise error rate (FWER)? Which is most important?

The Gene Set Enrichment Analysis PNAS paper describes each of these statistics: for FDR and nominal p value, see the section titled Appendix: Mathematical Description of Methods; for FWER, see the section titled FWER in the supplemental information. When reviewing GSEA results, you generally want to focus on gene sets that are significant, as indicated by an FDR less than 25%. For more information, see Interpreting GSEA in the GSEA User Guide.

Why does GSEA use a false discovery rate (FDR) of 0.25 rather than the more classic 0.05?

An FDR of 25% indicates that the result is likely to be valid 3 out of 4 times, which is reasonable in the setting of exploratory discovery where one is interested in finding candidate hypothesis to be further validated as a results of future research. Given the lack of coherence in most expression datasets and the relatively small number of gene sets being analyzed, using a more stringent FDR cutoff may lead you to overlook potentially significant results. For more information about gene set enrichment analysis results, see Interpreting GSEA in the GSEA User Guide.

Can I use GSEA to compare two datasets?

Yes. Create a gene set that contains the top 100 genes from the first dataset and use GSEA to analyze that gene set against the second dataset. Similarly, create a gene set that contains the top 100 genes from the second dataset and use GSEA to analyze that gene set against the first dataset.

Can I use GSEA to analyze a dataset that contains a single sample?

Yes, however, GSEA has no way of ranking the genes in such a dataset. Therefore, you must rank the genes and then use GSEA to analyze the ranked list of genes. For more information, see the GSEA Preranked Page in the GSEA User Guide.

Can I use GSEA to find pathways that correlate to the expression of my favorite gene?

GSEA is not designed for that use; however, it can be used to generate hypotheses about how your favorite gene is expressed in your expression dataset. To do that: find gene sets that contain your favorite gene and then use GSEA to analyze your expression dataset against those gene sets. For more information about finding and creating gene sets, see Gene Sets in the GSEA User Guide.

GSEA Data Files

How do I create an expression dataset file? What types of expression data can I analyze?

GSEA can be used with expression data from any source; for example, two-color ratio data, CEL files, different species, and so on. However, all expression data must first be converted into a supported ASCII tab-delimited file format, such as  res, gct, or pcl file. Other formats can easily be converted to these by reformatting the header and other simple modifications, such as column renaming, done by using a standard text editor. For more information, see Preparing Data Files in the GSEA User Guide.

Should I filter or pre-process my dataset before using GSEA?

While you generally do not want to filter your dataset based on expression values, you might want to minimize replicate samples and collapse probe sets. Collapsing the probe sets prevents multiple probes per gene from inflating the enrichment scores and facilitates the biological interpretation of analysis results. For more information, see Preparing Data Files in the GSEA User Guide.

How many samples do I need for a gene set enrichment analysis?

This depends on your specific problem and data characteristics; however, as a rule of thumb, you typically want to analyze at least ten samples.

How do I create a phenotype label file? What types of experiments can I analyze?

GSEA can be used to analyze experiments of any type (including time-series, three or more classes, and so on). The phenotype labels (cls) ASCII file defines the experimental phenotypes and associates each sample in your dataset with one of those phenotypes. The cls file is an ASCII tab-delimited file, which you can easily create using a text editor. For more information, see Preparing Data Files in the GSEA User Guide.

How does GSEA account for gene sets of different sizes?

GSEA automatically adjust the enrichment statistics to account for different gene set sizes, as described in the   Supplemental Information for the Gene Set Enrichment Analysis PNAS paper.

How do duplicate genes in a gene set, or duplicate gene sets, effect GSEA results?

Duplicate genes in a gene set and duplicate gene sets both effect GSEA results. GSEA automatically removes duplicate genes from each gene set, but does not check for duplicate gene sets. For more information, see Gene Sets in the GSEA User Guide.

How do gene sets that contain genes that are not in the gene expression data affect GSEA results?

The gene set enrichment analysis automatically restricts the gene sets to the genes in the expression dataset. The analysis report lists the gene sets and genes that were included and excluded from the analysis.

What array annotations are available? What if annotations are not available for my array?

See DNA Chip (Array) Annotations in the GSEA User Guide.

Can GSEA translate gene identifiers from one platform to another?

GSEA provides a utility, Chip2Chip, which translates gene identifiers from one platform to another (for example, from Affymetrix to Agilent). For more information, see Chip2Chip in the GSEA User Guide.

GSEA Results

Why do I get significant results with gene set (tag) permutation, but not with phenotype permutation? Which should I use?

Phenotype permutation generally provides a more stringent assessment of significance and produces fewer false positives. Which permutation type you should use depends on the number of samples that you are analyzing. For more information, see the description of the Permutation type parameter on the Run GSEA Page in the GSEA User Guide.

What is the difference between the weighted statistic and the classic statistic? Which should I use?

See the description of the Enrichment statistic parameter on the Run GSEA Page in the GSEA User Guide.

When I analyze your example datasets, the numbers in my analysis report are not the same as those in your paper. Why?

You are using a different random number generator (for sample permutation) and different seeds for that random number generator, so the resulting numbers are different.

Why do some of the example datasets contain negative expression values?

Because in older releases of Affymetrix gene chips expression values were trimmed averages over match and mismatched probes. If the mismatch probes were higher a negative number results.

How do I interpret my analysis results? What if no sets or too many sets are significant?

See Interpreting GSEA in the GSEA User Guide.

The nominal p value reported for some gene sets is zero.  What is the actual value?

A reported p value of zero (0.0) indicates an actual p-value of less than 1/number-of-permutations. For a more accurate p value, increase the number of permutations performed by the analysis. For more information about gene set enrichment analysis results, see Interpreting GSEA in the GSEA User Guide.

My top gene sets have small nominal p values (p<0.025), high FDRs (FDR=1). How should I interpret this?

The nominal p value estimates the significance of the observed enrichment score for a single gene set. However, when you are evaluating multiple gene sets, you must correct for multiple hypothesis testing. The FDR is the estimated probability that a gene set with a given enrichment score (normalized for gene set size) represents a false positive finding.

Generally, when your top gene sets have small nominal p values and high FDRs, it is because they are not as significant when compared with other gene sets in the empirical null distribution. This could be because you do not have enough samples, the biological signal is subtle, or the gene sets do not represent the biology in question very well. Also, the FDR is based on all gene sets; if only one of many gene sets is enriched, that gene set is likely to have a high FDR.

For more information, see Interpreting GSEA in the GSEA User Guide.

MSIGDB Gene Sets

What is MSigDB?

MSigDB, the Molecular Signature Database, contains curated gene sets for use with the gene set enrichment analysis. The GSEA team has begun the critical work of populating the MSigDb with curated gene sets. Increasing the number of gene sets increases the value of this resource; therefore, the GSEA team appreciates gene set contributions and encourages users to submit their gene sets to mailto:gsea@broad.mit.edu. For information about exporting gene sets from the MSigDB, see Gene Sets in the GSEA User Guide.

What gene sets are available? Can I create my own gene sets?

You can export gene sets from the Molecular Signature Database (MSigDB) or create your own. For more information, see Preparing Data Files in the GSEA User Guide.

What is the difference between gene sets in MSigDB and GO/BioCarta/GenMAPP?

MSigDB contains gene sets formatted for use with GSEA. Databases (such as, GO, BioCarta, and so on) are resources used to create the gene sets in MSigDb.

Do you have nifty looking pathway diagrams in MSigDB?

No.

How do I convert gene sets into my favorite array format?

GSEA provides a utility, Chip2Chip, which translates gene identifiers from one platform to another. For more information, see Chip2Chip in the GSEA User Guide.

Do you include GO gene sets?

Yes. See the description of the C2 subcollections in the MSigDB.

Do you provide MSigDB as a web service?

No for now.

Some of your gene sets have genes represented multiple times. Should this pass quality control?

The gene sets reflect the information in the original source and no attempt to modify the definition of a gene set is done (except for eliminating obvious gene duplications).  The gene sets defined in terms of gene symbols eliminate the duplication produced by multiple probes representing the same gene.

How can I find out more information about particular MSigDB gene sets?

Each gene set is described by a Gene Set Card on the GSEA web site.

GSEA SOFTWARE

How can I increase the amount of memory available to GSEA?

On Windows, edit the following line in the gsea_home/gsea.lax file:

lax.nl.java.option.java.heap.size.max=512m<o:p></o:p>

Can I run GSEA from the command line?

Yes. For more information, see Running GSEA from the Command Line in the GSEA User Guide.

Is there a programmatic API?

Yes. R and Java APIs are available on the GSEA web site.

I want to run GSEA software from my laptop when not connected to the internet. Is this possible?

Yes. You can use most functions in GSEA without being connected to the internet; for example, you can load files, run analyses, and review analysis results. However, you need to be connected to the internet to access the GSEA web site; for example, to download gene sets or read the documentation.

What version of R do I need for GSEA software?

 Version 1.9 or later.

What version of java do I need for GSEA software?

Java 1.4 or later.

How do I create the input files for GSEA in R?

The GSEA R code uses the gct, cls and gmt file formats for input. For more information, see Preparing Data Files in the GSEA User Guide.

<o:p> </o:p>